Vitus Sommet 29 CRX Mountain Bike

The Sommet 29 CRX is a top-level enduro race bike that features Kashima coated Fox Float Factory Series suspension and a Shimano XT 1×12-Speed groupset. This bike glides over rough terrain and finds traction and control in weather conditions, while smoothly shifting across its gear range and ensuring exceptional stopping power. It also rolls upon Tubeless Ready Nukeproof Horizon V2 wheels wrapped in high-grip Maxxis Assegai and Minion DHR II race tyres.

Fast and Aggressive All-Terrain Race Mountain Bike

The big-hitting Vitus Sommet CRX 29 Mountain Bike is all about the rush. The rush of air, the rush of trees passing you in a blur, the rush of tyres through dirt, the rush of light, the rush of sounds – the brief snapshots that flood your senses and place you deep in the zone.

And then there’s the rush that boils up inside you and the feeling of total control as you float from take-off to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last uplift. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it.

Agile, Durable and Stable Enduro Race Bike

The Sommet is a bike that you sit within, not perch on top. It’s a powerful rider position and together you are a team. Eagerly shred the refined berms and manicured obstacles of a trail centre but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of natural features and steep, technical ground. With volume added to the carbon front triangle, stability is rock solid without compromising agility. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you.

Whether threading the needle through Enduro tape or dropping into your favourite descent, speed comes easily to the Sommet. It thrives in the chaos of steep and turbulent trails. Bringing calm where all around there is frenzy.

Key Features:

Big-hitting enduro bike with modern geometry
Fox 38 and Float X2 Factory Series suspension
Shimano XT 1×12 speed drivetrain
Powerful Shimano XT 4 piston hydraulic disc brakes
Nukeproof Horizon V2 tubeless-ready wheelset with tape applied
Confidence-inspiring Maxxis Assegai and Minion DHR II tyres
Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile-inducing ride
Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear
Wheel Size: 29″
Suspension Travel (MTB Only): 170mm Front, 162mm Rear
Intended Use: Enduro

Features:

Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch
Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 62.5mm, trunnion
Fork: Fox 38 Float EVOL Factory Series 29″, 170mm travel, Kashima coating, Grip2 damper, 38mm stanchions, 110mm x 15mm bolt through axle, 44mm offset
Headset: Acros AZX-212-CO R5, ZS44/28.6 upper & ZS56/40 lower to suit 1-1/8″ upper tapered to 1.5″ lower headtube
Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9 degree Back Sweep, 31.8mm Clamp Diameter, S & M: 780mm Wide, L & XL: 800mm Wide
Stem: Nukeproof Horizon, 6061 Alloy, 50mm length, 31.8mm Handlebar Clamp Diameter, 5 degree Rise
Grips: Vitus Lock On
Wheelset: Nukeproof Horizon V2 Wheelset, 29″ Front and Rear, 32H, 6 Bolt, Boost 110mm x 15mm Front & 148mm x 12mm Rear Hub Spacing, Tubeless Ready
F/rim: Nukeproof Horizon V2, 29″, 32H, Presta Valve, Tubeless Ready Rim Tape Installed
R/rim: Nukeproof Horizon V2, 29″, 32H, Presta Valve, Tubeless Ready Rim Tape Installed
F/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 110mm x 15mm
R/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 148mm x 12mm
F/tyre: Maxxis Assegai, 29″ x 2.50″ WT, 3C MaxxGrip compound, EXO+ casing
R/tyre: Maxxis Minion DHR II, 29″ x 2.4″ WT, 3C MaxxTerra compound, DD casing
Chain: Shimano XT M8100, 12 Speed, 116 Links
Crankset: Shimano XT M8100, 12 Speed, 32T Narrow Wide Chainring, 170mm Crank Length
Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell
F/brake Set: Shimano XT, Lever: BL-M8100, Caliper: BR-M7120, Post Mount, Four Piston Caliper
R/brake Set: Shimano XT, Lever: BL-M8100, Caliper: BR-M7120, Post Mount, Four Piston Caliper
Rotors: Shimano RT76 or Brakco DR-02, 203mm Front & Rear, 6 Bolt Hub Fitment
R/derailleur: Shimano XT M8100, 12 Speed, Shadow Plus, Long Cage
R/shifter: Shimano XT M8100, 12 Speed, Rapidfire Plus
Freewheel: Shimano XT M8100, 12 Speed, 10-51T Range
Saddle: Nukeproof Horizon Enduro Saddle, Black, Steel Rails
Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L & XL: 170mm drop
Seat Screw: Vitus, 36.4mm Diameter
Weight: Medium: 15.6kg (tubeless setup)

Built, Tuned and Ready to Ride

Rest assured that each bike is fully built and tuned by Wiggle’s team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.

Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.

Note: Manufacturer may reserve the right to change the specification of that listed or shown on this page.