Vitus Sommet 297 AMP Mountain Bike

the Sommet 297 AMP features 170mm-travel RockShox suspension front and rear – Zeb Ultimate forks and a Super Deluxe Ultimate rear shock give you outstanding trail-smoothing traction for all-terrain racing. Spurring it onwards is a fast-shifting SRAM XO1 Eagle groupset with a 10-52T cassette and powerful all-weather SRAM Code RSC hydraulic disc brakes. It also rolls upon Tubeless Ready Nukeproof Horizon V2 wheels wrapped in Maxxis tyres and it features a RockShox Reverb Stealth dropper seatpost.

Ideal for Enduro, Bike Park and All Mountain Riding

When the trees are passing you in a blur and the beams of light and colour transport you to a new place. Is this what warp speed feels like? Float from take-off to landing and rip down descents, from bike park to big mountain and ragged off-piste. The rush as you roll out at the bottom of the trail and chase one last uplift. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it.

Mixed-Wheel Size for Optimised Speed, Agility and Control

The Sommet 297 AMP has been developed to run a manual-loving mullet wheel setup. A 27.5” rear wheel gives you more clearance to hang off the back on steep ground or drops, while a stable 29” wheel at the front eats up rocky terrain and keeps momentum high.

Long-Travel RockShox Suspension and SRAM XO1 Eagle Groupset

You’re getting the versatility of both wheel sizes in one bike. Keeping the shifting on-point is SRAM’s XO1 Eagle 12-speed drivetrain, paired with powerful SRAM Code RSC disc brakes that should put an end to those cold-sweat moments when you’re coming in just a little too hot. With volume added to the carbon front triangle, stability is rock solid without compromising agility. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you.

Powerful and Dependable Enduro Race Bike

The Sommet is a bike that you sit within, not perch on top. Eagerly shred the refined berms and manicured features of a trail centre but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of naturally technical ground. Whether threading the needle through Enduro tape or dropping in on your favourite descent, speed comes easily to the Sommet AMP. It thrives in the chaos of turbulent trails. Bringing calm where all around there is frenzy.

Key Features:

Carbon Sommet Enduro Platform: Modern geometry with an adjustable flip-chip, improved suspension kinematics and a smile-inducing ride
Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear
Wheel Size: Mullet – 29″ Front / 27.5″ Rear
Suspension Travel (MTB Only): 170mm Front, 170mm Rear
Intended Use: Enduro
Big-hitting enduro bike with modern geometry
RockShox Zeb Ultimate and Super Deluxe Ultimate RCT suspension
SRAM X01 1×12 speed drivetrain
Powerful SRAM Code RSC 4 piston hydraulic disc brakes
Nukeproof Horizon V2 Tubeless Ready wheelset with tape applied
Confidence-inspiring Maxxis Assegai and Minion DHR II tyres

Features:

Frame: Sommet T700 Carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru-axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch
Rear Shock: RockShox Super Deluxe Ultimate RCT, DebonAir, 205mm x 65mm, trunnion
Fork: RockShox Zeb Ultimate 29″, 170mm travel, Charger 2.1 RC2 damper, DebonAir, 38mm stanchions, 110mm x 15mm Maxle Stealth axle, 44mm offset
Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8″” upper tapered to 1.5″” lower headtube
Handlebar: Nukeproof Horizon V2 Carbon Riser, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 760mm Wide, L: 780mm Wide, XL: 800mm Wide
Stem: Nukeproof Horizon, 6061 Alloy, 50mm length, 31.8mm Handlebar Clamp Diameter, 5° Rise
Grips: Nukeproof Sam Hill, Enduro Race Super Soft Grips
Wheelset: Nukeproof Horizon V2 Wheelset, 29″ Front, 27.5″ Rear, 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready
F/rim: Nukeproof Horizon V2, 29″, 32H, Presta Valve, Tubeless Ready Rim Tape Installed
R/rim: Nukeproof Horizon V2, 27.5″, 32H, Presta Valve, Tubeless Ready Rim Tape Installed
F/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 110mm x 15mm
R/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 148mm x 12mm
F/tyre: Maxxis Assegai, 29″ x 2.50″ WT, 3C MaxxGrip compound, EXO+ casing
R/tyre: Maxxis Minion DHR II, 27.5″ x 2.4″, 3C MaxxTerra compound, DD casing
Chain: SRAM XO1 Eagle, 12 Speed, 118 Links
Crankset: Truvativ Descendant Carbon, Eagle 12 Speed, 30T Narrow Wide Chainring, 170mm Crank Length
Bottom Bracket: SRAM DUB, BSA Threaded BB, 73mm Shell
F/brake Set: SRAM Code RSC, Post Mount, Four Piston Caliper, Sintered Pads
R/brake Set: SRAM Code RSC, Post Mount, Four Piston Caliper, Sintered Pads
Rotors: SRAM Centreline, 200mm Front and Rear, 6 Bolt Hub Fitment
R/derailleur: SRAM XO1 Eagle, 12 Speed, Black
R/shifter: SRAM XO1 Eagle, 12 Speed, Black
Freewheel: SRAM XO1 Eagle, CS-XG-1295, 12 Speed, 10-52T Range
Saddle: Nukeproof Horizon Enduro Saddle, Black, Steel Rails
Seat Post: RockShox Reverb Stealth Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L & XL: 175mm drop
Seat Screw: Vitus, 36.4mm Diameter
Weight: Medium: 15.1kg (tubeless set up)

Built, Tuned and Ready to Ride

Rest assured that each bike is fully built and tuned by Wiggle’s team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.

Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.

Note: Manufacturer may reserve the right to change the specification of that listed or shown on this page.